RSA Resin Skimmer
Our testing sequence has successfully accomplished the surface cleaning of polyethylene and polypropylene pools processing waste.
The system is rated for oil collection, algae, paper pulp, steel, dairy, and industrial uses. Increasingly, due to regulations and health concerns with using chemical treatments to eliminate surface contaminants, it can be deployed in the cleaning of marinas, ponds, lakes, and wastewater lagoons.
The Skimmer can also be deployed in a range of aquaculture scenarios harvesting citrus, rice, and cranberries. The powerful diesel engine runs on biodiesel fuel whenever available to minimize airborne pollution.
RSA Skimmer Extractor
The RSA Skimmer Extractor is a self-contained stainless steel free-floating box with a 3″ diesel pump on board using 24 linear feet of weir board around its perimeter.
The 3″ discharge hose pumps 250 gpm of the highest concentration of oil to water. The 6’x6’x1′ unit takes in 6″ of draft and can discharge away up to 300′ using floating hose connected to any containment vessel or oil-water separator. The set up is a simple three step process: 1) place the unit in the center of the worst portion of the oil spill, 2) connect the discharge hose to a containment vessel and 3) turn on the pump. This instantly produces a sink effect in the water. The system draws equally from all sides.
RSA Skimmer Extractor Model RSASK6x6D3
The large 6’x6’x10” weighs approximately 600 lbs. and runs for 3 hours on a tank of diesel fuel. The output can be controlled by an on-board gate valve up to 300 GPM. It draws 6”.
RSA Skimmer Extractor Model RSASK3x3D2
The mid-sized 4’x4’x16” weighs approximately 200 lbs. and runs for 4 hours on a tank of diesel fuel. The output can be controlled by an on-board gate valve up to 150 GPM. It draws 12″.
RSA Skimmer Extractor Model RSASK2x2AC1.5
The small-sized 2’4”x2’4”x20” weighs 70 lbs. and runs on single phase 110 AC power. The output can be controlled by an on-board gate valve up to 75 GPM. It draws 12”.